Gear Review: SRU Precision Sruna-22 Bullpup Chassis for the Ruger 10/22

Americans seem to have a love-hate relationship with the bullpup firearm design, with the majority being against the design. I find myself in a different group, although it took some convincing to get me there.

Even less popular than bullpup firearms themselves are bullpup conversions, which turn traditional rifles into something resembling a futuristic science-fiction prop. Many of them are abominations destined for the smoky pits of hell. But every now and then, you find a diamond in the sulfur mines. Today, I think I’ve found one. We’re taking a look at the SRU Precision Sruna-22 bullpup chassis for the Ruger 10/22.

SRU Precision is a Taiwanese manufacturer known for some interesting 3D printed products and what they describe as 3D weaving technology. Their manufacturing approach has allowed them to produce some rather interesting designs, and the Sruna-22 is a good example.

Strangely enough, this chassis wasn’t originally designed for firearms. It was made for airsoft 10/22 clones, which happen to share enough compatibility with the real thing to make this conversion possible. Despite that somewhat unusual origin, the Sruna-22 is better constructed and more refined than many bullpup chassis designed specifically for actual firearms.

The Sruna-22 consists of two primary components: an aluminum upper assembly and a polymer lower. The upper is 6061 aluminum, while the lower uses PA66 polymer. The rifle is supported within the aluminum assembly using its original mounting hardware, along with additional compression screws that help center and stabilize the action.

The lower section incorporates a two-piece design that allows access to the rifle’s internal components without completely dismantling the chassis.

The trigger system is one of the more interesting aspects of this design. A wishbone-shaped dual-linkage system transfers the trigger movement to the original 10/22 trigger assembly. SRU has incorporated a spring dampener to take up slack and reduce the loose, sloppy sensation that commonly plagues bullpup trigger systems. Both the factory safety and an additional trigger-block safety are retained.

The chassis measures approximately 26.5 inches overall, depending on configuration, and weighs 38.5 ounces. It includes a full-length Picatinny top rail, M-LOK attachment points at the 3, 6, and 9 o’clock positions, and compatibility with standard AR-15 pistol grips.

It’s designed for standard Ruger 10/22 rifles, excluding the takedown models. Other features include provisions for left- or right-side ejection, clearance for suppressors up to 1.299 inches in diameter, and an optional buttpad riser.

When I opened the box, I was greeted by several notices explaining that this was a cosmetic outer shell for an airsoft replica. Apparently, SRU wants to make absolutely certain everyone understands that this is not a component intended for a firearm. Regardless, I had a real Ruger 10/22 waiting for its new home.

I selected a model with a 16-inch carbon fiber barrel for this project and experimented with several different triggers to see how the linkage performed.

Installation was straightforward. SRU includes a QR code that directs you to a PDF installation guide, and the instructions are easy enough to follow. All the necessary chassis hardware is included, although you’ll want to retain the original fasteners removed from your 10/22. I had no trouble getting everything together.

Once assembled, I added an EOTECH Vudu 1-8 riflescope mounted in an Area 419 mount. I also installed my YHM Phantom 22 suppressor before eventually switching to an Anechoic Pipsqueak for an even more compact package. The finished rifle looks pretty fantastic, if I do say so myself.

One thing worth mentioning is that the Sruna-22 doesn’t include a pistol grip. You’ll need to supply your own AR-style grip. I initially installed one that interfered with the use of larger 25-round magazines. Switching to the Kung Fu grip from DFCO changed the grip angle enough to eliminate that problem. I also gave the rifle a custom paint job because, apparently, I can’t leave anything alone.

After some initial testing at an indoor range, I took the rifle out for some more extensive shooting.

My biggest concern going into this project was the trigger. Bullpup designs have a reputation for bad triggers and remotely connecting a trigger to the original firing mechanism rarely improves things.

Fortunately, the Sruna-22 surprised me. The dual-linkage system does a good job of transferring trigger pull movement without introducing excessive flex. The spring dampener takes up much of the slack, making the initial movement feel like a first stage before the trigger breaks cleanly.

With the standard Ruger trigger, I found the pull weight heavier than I like, but the break was still respectable. Installing an improved trigger made a noticeable difference, producing a lighter and more pleasant pull.

The Sruna-22 also accommodates 10/22 receivers with or without an integrated Picatinny rail. SRU includes different-length support screws to accommodate both configurations. Depending on your particular rifle, oversized charging handles may require some attention to prevent interference. I had to make a minor adjustment to mine.

The standard 10/22 controls remain accessible, including the bolt release and safety. I also installed an extended magazine release, which I consider a worthwhile addition to a bullpup conversion. The additional trigger-block safety is located forward and uses an AR-style arrangement with a detent and spring housed in the pistol grip.

Rigidity is another important consideration with any bullpup conversion. A rifle needs to be supported properly if you expect it to maintain accuracy. The Sruna-22 uses six small adjustment screws to stabilize and center the action within the aluminum upper. Once installed, my rifle felt exceptionally solid. There was no noticeable rattling or movement, and the interface between the aluminum and polymer components was excellent.

The full-length Picatinny rail is substantial enough that I wasn’t concerned about excessive flex when mounting optics. The overall construction feels like something you’d expect from a quality firearm rather than an accessory chassis.

I found a couple of minor things worth mentioning. The quick-release action cowling is convenient, but its retaining pin seems a little too easy to remove. I could see it potentially getting knocked loose during active use. The cowling also attaches at a single point, leaving the front portion less secure than I would prefer. Neither issue was a deal breaker, but they’re worth noting. I also used blue Loctite on the rear end-block screws because their thread engagement seemed somewhat minimal.

As for accuracy, I don’t believe the Sruna-22 will magically improve an otherwise average 10/22. Proper support and alignment are important, but your rifle will generally shoot about as well as it did before the conversion. My particular setup produced groups around 1 MOA at 75 yards, which is plenty good for the intended purpose.

Ergonomically, I found the Sruna-22 quite comfortable. The AR-style grip arrangement makes it familiar to most shooters, and the overall balance is excellent. The length of pull can be increased with optional spacers, but I left mine at the standard configuration.

I actually prefer that shorter setup, particularly because it makes the rifle comfortable for my kids as well. The rubber buttpad provides a good shoulder interface, while the M-LOK slots offer plenty of options for additional accessories. SRU also includes an adhesive cheek pad, although I opted not to install it.

One particularly impressive feature is how easy the Sruna-22 is to service. Bullpup chassis can make cleaning a 10/22 unnecessarily complicated, but SRU seems to have anticipated that. Removing a single retaining pin allows the action cowling to come off, providing access to the bolt, operating rod, and trigger assembly. You can remove these components without tools, and the process is actually faster than accessing the action in the factory configuration. That’s a pretty clever piece of engineering.

I’ve handled more than a few bullpup conversions for the Ruger 10/22, and while I don’t dislike all of them, the Sruna-22 is easily the best one I’ve encountered. It brings the compact dimensions, balance, and futuristic appearance of a bullpup to the familiar 10/22 without sacrificing the quality I expect from a firearm accessory. The trigger linkage is surprisingly good, the construction is excellent, and the ability to access the action for cleaning is a major advantage.

There are a couple of small design details I’d like to see improved, but they’re minor complaints considering the overall package. The Sruna-22 is comfortable, fun to shoot, and looks fantastic. Most importantly, it feels like a complete rifle rather than a collection of parts assembled to create a bullpup.

Specifications: SRU Precision Sruna-22 Bullpup 10/22 Chassis

Design: Bullpup chassis conversion
Compatibility: Ruger 10/22 (excluding takedown models)
Overall Length: 26.3–26.7 inches
Length of Pull: 14.3–14.75 inches
Weight: 38.5 ounces
Top Rail: Full-length Picatinny
Accessory Mounting: M-LOK slots at 3, 6, and 9 o’clock
Grip Compatibility: Standard AR-15 pistol grips
Ejection Port: Right or left-side ejection option
Suppressor Clearance: Up to 1.299-inch diameter
Additional Accessories: Optional 11mm buttpad riser
Available Colors: Black, Tan, OD Green, White
Price: $299

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top