Fidget Factor: The CRKT Fulcrum 2, an Unusual Twist on the EDC Knife

 

There are only so many ways to open a folding knife. Or at least that’s what you might think after handling enough thumb studs, flippers, nail nicks, and assisted-opening designs. Every once in a while, though, somebody comes along with something that makes you stop and scratch your head.

The CRKT Fulcrum 2 is one of those head-scratchers.

The Fulcrum 2 is a practical, reasonably priced everyday carry folder with an opening mechanism unlike anything else I’ve ever used. It’s also one of the few knives I had to look up instructions for before I could figure out how to open it. Once I did, though, I found myself sitting at my desk repeatedly opening and closing it, partly to get familiar with the mechanism, but mostly because it’s just plain fun.

The CRKT Fulcrum 2 Opening Mechanism

The Fulcrum 2 isn’t actually a new concept. The original Fulcrum opening mechanism was invented by Charles Kain. Knife designer Russ Kommer then incorporated the mechanism into a folding knife design. The Fulcrum 2 first appeared in 2016, and CRKT has now brought it back for another run. Even though the mechanism has been around for years, it was completely new to me.

Rather than pushing on a thumb stud or pulling a flipper tab, you press down on the sliding handle scale and pull it rearward. That movement swings the blade into the open position, where a conventional liner lock secures it.

It’s a two-stage motion that initially reminded me of operating a pump shotgun. The mechanics aren’t the same, and neither is the actual movement. Still, there’s something about the deliberate manipulation of the handle that brought that comparison to mind. On a shogun you pull the pump to the rear to eject the empty case an push forward to chamber a new round. On the Fulcrum II you posh down on the bolster to partially open the blade, then pull up on it snap and lock it in place. Both have that two stage mechanism and “chink-chink” sound in the process.

The action is a little difficult to explain in words. Frankly, I couldn’t figure it out myself until I watched the demonstration video on CRKT’s website. Once you see it done, though, it makes sense. The mechanism isn’t necessarily intuitive, but it isn’t difficult either. After a little practice, I found I could operate it easily with one hand. The more I used it, the more natural the motion became. I showed the Fulcrum 2 to several buddies, who all thought the mechanism was pretty neat. They also admitted they probably wouldn’t have figured it out without seeing someone demonstrate it first.

The Fulcrum 2 Fidget Factor

The action also has a definite fidget factor. Unlike most folding knives, you can actually watch the mechanism work as the handle scale moves and the blade rotates into position. It’s an interesting bit of mechanical engineering, and I found myself opening and closing it just to watch everything move.

In fact, I managed to annoy a few buddies while we were sitting around drinking beer by the fire because I kept playing with it. Of course, handing it to someone closed and seeing whether they could figure out how to open it was entertaining, too.

There’s something satisfying about the mechanism once you get the hang of it. I don’t know that it offers any particular advantage over a conventional opening system, but it certainly makes the knife interesting.

A Practical EDC Knife Underneath

The unusual opening mechanism is obviously the Fulcrum 2’s main attraction. However, the knife itself is a pretty sensible everyday carry design. It has a 3.18-inch 8Cr13MoV blade with a titanium nitride finish. Overall length is 7.56 inches, with a closed length of 4.45 inches. Weight is listed at 4.7 ounces.

The handle combines glass reinforced nylon scales with stainless steel bolsters. That gives the Fulcrum 2 a more refined appearance than the typical all black tactical folder. I like the look of the Fulcrum 2. The contrasting handle materials dress it up a little without making it look like something too fancy to actually use.

The blade has a practical shape for everyday cutting chores, with enough belly for slicing and a useful point. The factory edge on my sample was quite good, and I had no complaints about its initial sharpness. The knife uses a conventional liner lock, which engaged solidly throughout my testing. Releasing the lock is straightforward and familiar, even if opening the knife takes a little getting used to.

Pocket Carry and Left-Handed Use

I also experimented with operating the Fulcrum 2 left-handed. The opening mechanism works from either side, although I found it a little more awkward with my left hand. I’m right-handed, though, so that’s not particularly surprising.

The liner lock favors right handed operation, and the pocket clip is mounted for right hand, tip down carry. It doesn’t appear to be reversible. During my week of regular carry, the clip held the knife securely in my pocket while still allowing an easy draw. Nothing particularly remarkable about it, but that’s fine. It does exactly what a pocket clip should do without drawing attention to itself. Left-handed users should be able to operate the knife, but they won’t have the same carry flexibility offered by some other folders.

Putting the CRKT Fulcrum 2 to Work

I had the Fulcrum 2 for about a month now, including about a couple weeks of steady pocket carry. That gave me enough time to get familiar with the mechanism and put the blade through some ordinary everyday tasks. Most of that work was pretty typical EDC stuff. I opened boxes and packages, cut packaging materials, and used it for the sorts of little jobs that come up throughout the day. The blade shape worked well, and the factory edge held up nicely.

I also spent some time around the fire turning big sticks into little sticks. I’m not talking about serious wood carving or bushcraft work, just casual whittling to pass the time on the porch and around the campfire. The Fulcrum 2 was decently comfortable for that sort of work. It’s not a dedicated carving knife, but it certainly handled the job well enough.

A Little Improvised Range Work

The Fulcrum 2 also accompanied me to the shooting range on a couple of trips, where I used it to open ammunition boxes and deal with a couple of unexpected problems. I had some fired .22 cases get stuck, and I used the tip of the Fulcrum 2 to help remove them. I also had a fired .350 Legend case slip beneath the extractor on my Rossi LWC single shot rifle. The knife tip helped me get that one out as well.

Now, using the tip of your pocketknife to remove stuck brass isn’t exactly recommended knife practice. A proper tool would be preferable. But sometimes you use what you have on hand, and the Fulcrum 2 was what I had in my pocket. It handled the job without any apparent damage.

Throughout my testing, I didn’t experience any loosening of the sliding handle scales or problems with the opening mechanism. The liner lock continued to engage positively, and the blade retained a good working edge. I can’t say how everything will hold up long term, just yet. I can say that everything worked as intended during the time I carried and used it though.

Novelty or Practical Innovation?

That’s really the big question with the Fulcrum 2. Does its unusual opening mechanism offer any practical advantage over the more conventional systems already available?

I’m not convinced that it does. Thumb studs, flippers, and other one handed opening systems already work extremely well. The Fulcrum mechanism doesn’t necessarily make opening a knife faster, easier, or more convenient. In fact, there’s a definite learning curve before it becomes natural.

On the other hand, once you’ve learned the motion, it works just fine. I had no trouble opening the Fulcrum 2 one handed after getting accustomed to it. I suspect someone who carries this knife as their primary EDC would quickly develop the muscle memory to operate it without thinking. If you’re like me and rotate through a variety of carry knives, you might need to refresh your technique when you come back to it.

There is one other interesting aspect to the mechanism. Because the opening sequence is so unusual, someone unfamiliar with the Fulcrum 2 may have trouble figuring out how to deploy the blade. That might discourage casual handling by someone who picks it up without knowing how it works. I certainly wouldn’t consider that a safety feature or rely on it to prevent unauthorized access. Once you know the trick, opening the knife is easy. It’s simply an interesting side effect of the design.

CRKT Fulcrum 2 Final Thoughts

The CRKT Fulcrum 2 is an interesting knife because it combines an unconventional opening system with an otherwise practical everyday carry design. The blade is a useful size and shape, the handle is comfortable enough for ordinary cutting chores, and the liner lock worked reliably. The contrasting scales and bolsters give it an attractive appearance. With a $60 MSRP, it’s also priced as a working EDC knife rather than an expensive collector’s piece.

The opening mechanism is the real selling point, though. It’s unusual, mechanically interesting, and frankly a lot of fun to play with. I don’t know that the Fulcrum 2 solves any problems I was having with conventional folding knives. But after carrying and using it, I don’t think it needs to. It’s a functional, good looking EDC knife that happens to open in a way most people have never encountered before. Sometimes being different, especially when it works, is reason enough.

For more information, visit CRKT’s Fulcrum 2 product page.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top